4 resultaten voor "ViaBlue T6s Antennestekkers schroefbaar - Per paar" tussen € 10,00 en € 50,00

For the assembly the stripped cable ends are soldered at the contact parts of the T6s plugs. The contact part can be removed completely from the plug's shell. The M4 screw serves as strain relief. The shell for all plugs (exception: XLR plugs) of the ViaBlue™ T6s series is identical. Only the contact parts change.

Each T6s plug contains two diameter decreasers which serve for a firm strain relief and centric adjustment of the cables. The small diameter decreaser has an outter diameter of 7.5 mm and an inner diameter of 4.5 mm. Thus cables with an outter diameter of 3 mm up to 4.5 mm can be fixed firmly. The big diameter decreaser has an outter diameter of 9.5 mm and an inner diameter of 7.5 mm. Thus cables with an outter diameter from 5 mm to 7.5 mm can be fixed firmly. Without using any diameter decreaser...

For the assembly the stripped cable ends are screwed in the housing of the T6s screw RCA plug. The conductor is guided by the isolation to the pin and fixed by screw. The screening is turned 360° arround the cable, pressed against the isolation and fixed by another screw. Finally, the two outer screws are tightened to fix the shell and hold the cable tight in the connector's housing. Cables with 7-8 mm diameter can be installed.

Sensitive ends of optical fiber cables are perfectly protected by the teflon isolated ViaBlue T6s toslink plug that is made of brass. An extended metal insert plug provides a stabilized position for the contact part and bare optical wave guide and maximum, lasting protection.